On this page
OEM contract manufacturing for industrial equipment means an equipment builder hands production of its metal parts, from sheet metal guards to welded base frames, to an outside manufacturer that builds them to the OEM’s drawings. The OEM keeps design, final assembly, testing and the customer; the contract manufacturer supplies material, cutting, forming, welding and finishing on a schedule tied to the OEM’s build plan.
Industrial equipment is a good fit for this model because the metal content is large, varied and repetitive. A single machine can carry dozens of part numbers across three or four process families, and most of them repeat with every unit built.
What industrial equipment OEMs outsource
Builders of packaging lines, material handling systems, compressors, generators, pumps, food processing machinery and agricultural equipment tend to outsource the same part families. Each family leans on a different set of processes.
| Part family | Examples | Main processes |
|---|---|---|
| Sheet metal | Guards, covers, access panels, control enclosures, brackets | Laser cutting, press brake forming, hardware insertion, powder coating |
| Plate parts | Mounting plates, gussets, base plates, wear plates, lifting lugs | Plasma or oxy-fuel cutting, beveling, machining, grinding |
| Structural and tube | Machine frames, skids, stands, conveyor legs, cross members | Sawing, tube laser cutting, drilling, coping |
| Weldments | Base frames, chassis, hoppers, equipment supports | Fit-up, manual or robotic welding, stress relief, machining |
| Kits and subassemblies | Bagged hardware sets, painted part kits, bolted subassemblies | Kitting, assembly, packaging |
Most OEMs keep the work that defines their product in house, such as final assembly, controls integration, testing and commissioning, and outsource the metal that supports it.
Matching parts to materials
Equipment parts are usually specified in a small set of materials. Keeping the list short across a whole machine makes material planning simpler and helps the supplier nest parts from the same sheet or plate.
- Cold rolled and hot rolled carbon steel. The default for painted guards, panels, frames and brackets. Cold rolled sheet to ASTM A1008 gives a smooth surface for powder coat, while hot rolled sheet to ASTM A1011 suits heavier structural parts where surface finish matters less.
- A36 plate and shapes. The workhorse for base frames, skids and mounting plates, with a 36 ksi (250 MPa) minimum yield strength and good weldability.
- Stainless steel. 304 for washdown, food contact zones and wet environments; 316 where chlorides or cleaning chemicals are aggressive. See carbon steel vs stainless steel for the tradeoffs.
- Aluminum. 5052 sheet for lightweight covers and doors that need good formability and corrosion resistance; 3003 for simple formed parts.
- Coated steel. Galvanized or galvannealed sheet for parts that stay unpainted or need extra protection under paint.
Building the technical data package
The quality of the quote and the first parts depends on what the OEM sends. A complete package for an equipment program usually includes:
- Drawings at the current revision, with 3D models (STEP files are the most portable) and flat patterns where they exist.
- Material grade and specification for every part, plus any approved alternates.
- Finish requirements: coating type, color, film thickness and masking areas.
- Weld requirements, including the governing code (AWS D1.1 for structural steel is common) and any inspection level.
- Annual volume, typical release quantity and how often the design is likely to change.
- Documentation needs such as mill certifications, first article reports, RoHS declarations or domestic origin records.
- Packaging and labeling rules, especially if parts go straight to the assembly line.
Tip: Flag the dimensions that actually control fit or function. A supplier that knows which features are critical can focus inspection there and suggest relaxing the rest, which often lowers price without any risk to the machine.
From prototype to steady production
Equipment programs rarely jump straight to volume. They move through stages, and each one needs something different from the supplier.
Prototype and pilot builds
Early units are built in ones and twos while the design is still moving. Speed and flexibility matter more than piece price. Laser cutting and CNC press brakes work well here because they run from CAD files with no hard tooling, so revisions cost little.
Design for manufacturability review
Before release to production, a DFM review compares the design with the supplier’s processes. Typical suggestions include standard bend radii, consistent gauges across similar parts, tab and slot features that locate weldment parts without fixtures, and combining several small brackets into one formed part. Our guide to sheet metal design for manufacturability covers the common rules.
First article and release
The first production parts are measured against the drawing and documented in a first article report. After approval, the program moves to blanket orders with scheduled releases, and any later design change runs through the OEM’s engineering change process before the shop builds the new revision.
Steady state
Once volumes settle, the focus moves to consistency and supply: locked CNC programs and fixtures, material held for the program, and deliveries timed to the OEM’s build schedule.
Managing cost and supply across a program
Piece price is only part of the cost of a metal part. On an equipment program, these levers usually matter more:
- Part consolidation. Fewer part numbers means fewer setups, fewer drawings to maintain and fewer chances for a shortage to stop the line.
- Common materials and gauges. Standardizing on a few stocked grades and thicknesses improves nesting yield and reduces the risk of waiting on an unusual size.
- Realistic forecasts. Sharing a rolling forecast lets the supplier buy and hold material ahead of demand.
- Inventory programs. Vendor managed inventory, kanban bins and kitting move storage and replenishment work to the supplier, so the OEM’s floor holds work in progress instead of shelving.
- Fewer suppliers. Each extra vendor adds freight, purchase orders, receiving inspection and coordination. Consolidating sheet metal, plate, weldments and finishing with one supplier removes those handoffs.
Quality and compliance expectations
Industrial OEMs typically expect an ISO 9001 quality management system, documented first article approval, controlled revisions and corrective action when a nonconformance occurs. Beyond that, requirements depend on the market the equipment serves.
- Material traceability. Mill certifications tied to heat numbers, required by many pressure, lifting and defense related applications.
- Machine guarding. In the US, OSHA 29 CFR 1910.212 requires employers to guard machine hazards such as points of operation, nip points and rotating parts. The OEM’s design sets guard geometry and opening sizes; the supplier’s job is to build them exactly to print.
- Restricted substances. Equipment sold into the EU or to electronics customers may need RoHS declarations for coatings and materials.
- Domestic content. Government buyers and some energy projects require domestic steel. Confirm the exact rule with your contracting officer or tax advisor before you specify material.
How ASA supports industrial equipment OEMs
American Steel & Aluminum combines metals distribution, processing and fabrication under one company, so equipment parts can start from material already in stock. Fiber and tube laser cutting, plasma and oxy-fuel plate cutting, CNC press brakes, manual and robotic welding, machining and powder coating run across five Northeast locations, with ISO 9001:2015 certified quality management at Auburn, South Portland and Liverpool and mill certifications and full material traceability available. VMI, kanban, kitting and JIT delivery support repeat programs, with most orders delivered in 24 to 48 hours. Learn more about industrial equipment manufacturing or request a quote.
Frequently asked questions
Which industrial equipment parts are best suited to contract manufacturing?
Parts that repeat on every unit and use common processes are the best candidates: sheet metal guards and covers, laser cut brackets, plate mounting parts, tube frames and welded bases. They carry a lot of setup and material planning that a contract manufacturer can spread across volume. Work that defines the product, such as controls integration and final testing, usually stays with the OEM.
Should an OEM outsource weldments and sheet metal to the same supplier?
Often, yes. When one supplier cuts, forms, welds and coats, parts move between processes on the same floor instead of on trucks between vendors, and one quality system covers the whole assembly. The main reason to split them is a specialty requirement, such as a weld procedure or coating that only one qualified source can meet.
What file formats should an OEM send for a metal parts quote?
Send PDF drawings at the current revision plus 3D models, ideally STEP, so the supplier can check geometry and generate flat patterns. DXF files help for flat laser cut parts. Include a bill of materials for assemblies and note which drawing governs if the model and drawing ever disagree, which is usually the drawing.
How do engineering changes work once a part is in production?
The OEM issues an engineering change notice with the new drawing revision and an effective point, such as a date or serial number. The supplier updates programs and fixtures, decides with the OEM what to do with parts and material at the old revision, and confirms the first parts at the new revision. Clear effectivity avoids mixed revisions on the assembly line.
Can a contract manufacturer hold inventory for an equipment OEM?
Many can. Under vendor managed inventory or kanban, the supplier keeps an agreed quantity of finished parts or raw material on hand and replenishes it based on usage. The OEM pays when parts ship or are consumed, depending on the agreement. This protects the assembly line from shortages without filling the OEM's own warehouse.