On this page
Sheet metal fabrication is the process of turning flat metal sheet into finished parts by cutting, forming, joining and finishing it. Brackets, enclosures, panels, chassis, server rack components and machine guards are all typical sheet metal parts, usually made from carbon steel, stainless steel, aluminum or coated steel.
Sheet is most often defined as metal thinner than 0.25 in (6.35 mm), though some product specifications draw the line slightly lower; thicker material is called plate and runs on heavier equipment. The sections below cover each process step, the common materials and gauges, the tolerances fabricators typically hold, and design choices that make parts easier and cheaper to build.
Sheet metal fabrication processes
Most parts pass through some combination of four process families. The order varies, but cutting almost always comes first and finishing comes last.
Cutting
Laser cutting uses a focused beam to cut profiles, holes and slots from flat sheet with no hard tooling. Fiber lasers cut carbon steel, stainless and aluminum quickly with a narrow kerf, which makes them the standard tool for prototypes and complex parts. For a comparison with other thermal methods, see laser vs plasma cutting.
Punching on a CNC turret press strikes holes and shapes with hardened tooling. It is fast for repeated hole patterns and can also form features such as louvers, extrusions and countersinks. Combination laser punch machines do both on one sheet.
Shearing makes straight cuts between an upper and lower blade. It is the quickest, lowest cost way to cut rectangular blanks and strips to size.
Forming
Press brake forming bends sheet between a punch and a V-shaped die. Most precision work uses air bending, where the angle is set by how far the punch travels into the die, so one set of tools can make many angles. A CNC back gauge positions the part for each bend. Read more in our guide to press brake forming.
Rolling passes sheet through a set of rolls to make cylinders, cones and large radius curves for parts such as ducts, guards and covers.
Joining
Welding fuses parts into one assembly. MIG (GMAW) welding is fast and common on carbon steel, while TIG (GTAW) gives more control on thin stainless and aluminum. Robotic weld cells repeat the same welds on production runs, and resistance spot welding joins overlapping sheets without filler metal.
Hardware such as self-clinching nuts, studs and standoffs is pressed into the sheet to create threads in material too thin to tap. Rivets and screws join parts that must come apart later or should not be heated.
Finishing
Deburring removes sharp edges left by cutting and punching, by hand or by machine. Powder coating applies dry polymer powder electrostatically and cures it in an oven, giving a durable, even finish on steel and aluminum. Other options include plating, anodizing for aluminum, and brushed or polished finishes for stainless.
Common sheet metal materials
Material choice sets strength, corrosion resistance, formability, weight and cost. These grades cover most fabricated sheet metal work.
| Material | Common grades and specs | Typical uses |
|---|---|---|
| Cold rolled carbon steel | C1008, C1010 to ASTM A1008 | Brackets, enclosures and panels that will be painted or powder coated |
| Hot rolled carbon steel | ASTM A1011, including pickled and oiled | Heavier brackets, frames, parts where surface finish matters less |
| Galvanized steel | ASTM A653, G60 and G90 coatings | HVAC, outdoor enclosures, parts that need corrosion resistance without paint |
| Stainless steel | 304, 316 and 430 to ASTM A240 | Food equipment, marine and chemical exposure, appliance and architectural trim |
| Aluminum | 3003-H14, 5052-H32 to ASTM B209 | Lightweight enclosures, covers, marine and transportation parts |
5052-H32 is the usual choice for formed aluminum parts because it bends well and resists corrosion. Stainless steel work hardens as it is formed, so it needs more press tonnage than carbon steel of the same thickness and springs back more after bending.
Sheet metal gauges and thickness
Sheet thickness is often called out by gauge number. A higher gauge means thinner material, and the same gauge number gives a different thickness for carbon steel, galvanized, stainless and aluminum, because each follows its own gauge system.
| Gauge | Carbon steel | Galvanized | Stainless | Aluminum |
|---|---|---|---|---|
| 10 | 0.1345 in (3.42 mm) | 0.1382 in (3.51 mm) | 0.1406 in (3.57 mm) | 0.1019 in (2.59 mm) |
| 11 | 0.1196 in (3.04 mm) | 0.1233 in (3.13 mm) | 0.1250 in (3.18 mm) | 0.0907 in (2.30 mm) |
| 12 | 0.1046 in (2.66 mm) | 0.1084 in (2.75 mm) | 0.1094 in (2.78 mm) | 0.0808 in (2.05 mm) |
| 14 | 0.0747 in (1.90 mm) | 0.0785 in (1.99 mm) | 0.0781 in (1.98 mm) | 0.0641 in (1.63 mm) |
| 16 | 0.0598 in (1.52 mm) | 0.0635 in (1.61 mm) | 0.0625 in (1.59 mm) | 0.0508 in (1.29 mm) |
| 18 | 0.0478 in (1.21 mm) | 0.0516 in (1.31 mm) | 0.0500 in (1.27 mm) | 0.0403 in (1.02 mm) |
| 20 | 0.0359 in (0.91 mm) | 0.0396 in (1.01 mm) | 0.0375 in (0.95 mm) | 0.0320 in (0.81 mm) |
| 22 | 0.0299 in (0.76 mm) | 0.0336 in (0.85 mm) | 0.0313 in (0.80 mm) | 0.0253 in (0.64 mm) |
| 24 | 0.0239 in (0.61 mm) | 0.0276 in (0.70 mm) | 0.0250 in (0.64 mm) | 0.0201 in (0.51 mm) |
These values are nominal. Because gauge numbers are not consistent across materials, specify decimal thickness on drawings and purchase orders, especially for aluminum. For weights per square foot and a wider range of gauges, see the sheet metal gauge chart.
Typical sheet metal tolerances
Every process has a range of accuracy it holds in normal production. The ranges below are typical industry values for general sheet metal work. They are not guaranteed values from ASA or any specific shop: actual tolerances depend on material, thickness, part size and equipment, and should be agreed with your fabricator at the quote stage.
| Feature | Typical industry range | Notes |
|---|---|---|
| Laser cut profile and hole location | ±0.004 to ±0.010 in (±0.10 to ±0.25 mm) | Tighter on thin sheet, looser on thicker material |
| Punched hole location | ±0.004 to ±0.010 in (±0.10 to ±0.25 mm) | Depends on tooling and sheet repositioning |
| Sheared length or width | ±0.010 to ±0.030 in (±0.25 to ±0.76 mm) | Grows with thickness and blank length |
| Bend angle | ±0.5 to ±1 degree | Affected by springback and material variation |
| Formed dimension, single bend | ±0.010 to ±0.020 in (±0.25 to ±0.51 mm) | Edge or hole to bend |
| Formed dimension, across several bends | ±0.020 to ±0.030 in (±0.51 to ±0.76 mm) | Tolerances add up with each bend |
| Welded assembly, overall size | ±0.030 to ±0.060 in (±0.76 to ±1.52 mm) | Heat distortion; fixtures improve results |
Tip: Tolerances stack up across bends. If two holes on different flanges must line up, dimension both from a common datum and mark only that relationship as critical, instead of tightening every dimension on the drawing.
Design tips for sheet metal parts
- Use an inside bend radius at least equal to material thickness. A radius of one material thickness works for most carbon steel and 5052 aluminum; harder tempers and thicker material need larger radii to avoid cracking.
- Keep one bend radius throughout the part. A consistent radius lets the fabricator form every bend with a single tool setup.
- Make flanges long enough to form. The flange has to span the die opening, so a common shop rule sets the minimum flange at about 0.7 times the V-die opening. That is roughly 4 times material thickness on a narrow 6T die and about 5.5 times thickness on the standard 8T die.
- Keep holes away from bends. Keep the edge of each hole or slot at least 2.5 times material thickness plus the inside bend radius away from the bend so it does not distort.
- Size punched holes to the material. For punched parts, keep hole diameters at least equal to material thickness.
- Add bend reliefs. Where a bend meets an edge, a small relief cut prevents tearing and bulging.
- Tolerance only what matters. Put tight tolerances on functional features and leave everything else at the general tolerance.
- Design around common sheet sizes. Parts that nest efficiently on standard sheets such as 48 x 96 in or 60 x 120 in produce less scrap and cost less in material.
Sheet metal fabrication at ASA
ASA’s precision sheet metal manufacturing starts with material from its own stock of carbon steel, stainless, aluminum and coated sheet. The Auburn, MA facility houses a sheet metal shop with a laser punch press, forming, welding, blasting and powder coating, and ASA’s 8 kW Trumpf TruLaser 3040 fiber laser cuts carbon, stainless and aluminum on an 80 x 160 in table. CNC press brakes handle prototype through production quantities, and robotic weld cells take on production runs, all under an ISO 9001:2015 certified quality management system. Request a quote to send your drawings for review.
Frequently asked questions
What is the difference between sheet metal and plate?
The most common dividing line is 0.25 in (6.35 mm). Material thinner than that is sheet and is usually specified by gauge or decimal thickness, while material 0.25 in and thicker is plate, specified in fractional or decimal inches. Plate is generally cut on plasma, oxy-fuel or high power laser equipment and formed on heavier press brakes with larger tooling.
What is the most common sheet metal fabrication process?
Cutting and press brake bending appear on almost every sheet metal part. A typical bracket or enclosure is laser cut or punched from flat stock, then bent to shape on a press brake. Welding, hardware insertion and finishing are added depending on the design. Because cutting and bending are so universal, designing for them gives the biggest cost savings.
Which metal is easiest to fabricate?
Cold rolled carbon steel is generally the easiest: it cuts cleanly, bends predictably with little springback and welds well with common MIG processes. 5052 aluminum also forms well but takes more care to weld. Stainless steel is harder to process because it work hardens and springs back more, so it needs more press tonnage and closer control of heat during welding.
How accurate is sheet metal fabrication?
For general work, laser cut and punched features typically land within a few thousandths of an inch, and bend angles within about half a degree to one degree. Formed and welded dimensions vary more, because small errors accumulate over several bends and welding heat causes distortion. Capability differs between shops and materials, so agree on tolerances for your specific drawing before production starts.
Can sheet metal parts be powder coated?
Yes. Powder coating is one of the most popular finishes for steel and aluminum sheet metal parts. Parts are cleaned and pretreated, sprayed with electrostatically charged powder, then cured in an oven to form a hard, even film. Galvanized steel can also be powder coated with suitable pretreatment, and the finish works on welded assemblies as well as individual parts.