On this page
ASA Liverpool is a steel and metals service center in Liverpool, New York, just outside Syracuse, that stocks carbon steel, stainless steel and aluminum and delivers it across the state on ASA’s own trucks. It has been a Central New York metals supplier since 1977 and serves customers from Albany to Buffalo.
Buyers use the service center in two ways: to order material in standard mill sizes, or to have it cut to size and staged so it arrives ready for their own shop floor. Both run under the same ISO 9001:2015 certified quality management system, with mill certifications available on every order that needs them.
Metals available through the Liverpool service center
Liverpool customers order from ASA’s stock list, which covers flat-rolled, structural, bar and tube products. The main families and the specifications they are listed to are below.
| Product family | What is stocked | Specifications listed |
|---|---|---|
| Hot rolled and cold rolled carbon steel | C1006, C1008, C1010, C1045, C1050, C1074, C1075, HSLA, A36 | ASTM A1008, A1011, A1018, A568 |
| Stainless sheet and plate | 304, 304L, 316, 316L, 430 (2B and BA) | ASTM A240, A480, A666; ASME SA240, SA480 |
| Aluminum sheet and plate | 3003-H14, 5005, 5052-H32 and H34 | ASTM B209, ASME SB-209 |
| Coated sheet | Galvanized (mainly G90), galvannealed (A40, A60), Galvalume AZ40, aluminized | ASTM A653, A792, A463 |
| Structural shapes | Angle, channel and wide flange beam | ASTM A36, A992, A709, A588 |
| Bar and tube | Flats, squares and rounds; structural and mechanical tube | Carbon steel, stainless and aluminum |
A few quick rules of thumb help narrow the choice. A36 is the general-purpose structural grade for plate and shapes, while C1045 is a medium carbon steel often chosen for machined parts. Among the stainless grades, 304 covers most general work and 316 adds molybdenum for better resistance to chlorides such as road salt and de-icing chemicals. In aluminum, 3003-H14 is an economical choice for general sheet work and 5052 offers higher strength and better corrosion resistance.
Tread bright and diamond plate are also on the stock list. Browse the full range of sheet and plate products, including stainless and galvanized.
Buying cut-to-size instead of full sheets and plates
Ordering full mill-size sheets and plates means storing them, lifting them with your own equipment and cutting them yourself. Having the service center cut blanks to size moves that labor, and the scrap, off your floor. The Liverpool facility runs CNC plasma and oxy-fuel plate cutting and flat and tube lasers, so material can leave as squared blanks, strips or near-net profiles instead of raw stock.
Cut-to-size buying tends to make the most sense when:
- Your shop lacks the crane or forklift capacity to handle full plates safely.
- You only need part of a plate and do not want to pay to store the rest.
- The same blanks repeat every month and can be cut on a schedule.
- Profiles are complex enough that cutting them in house would tie up your own equipment.
To estimate shipping and handling loads before you order, the steel plate weight calculator gives the weight of a plate from its thickness and dimensions.
Inventory programs for Central New York manufacturers
For material you buy on a regular cycle, ASA’s inventory programs can take over part of the inventory job for Liverpool customers. Vendor managed inventory (VMI) puts ASA in charge of watching stock levels and replenishing them. Kanban uses an empty bin or card as the reorder signal. Kitting groups cut parts into sets matched to your build sequence. With just-in-time (JIT) delivery, most orders are delivered in 24 to 48 hours.
The result is less metal sitting on your floor and fewer emergency orders. For how these programs are usually set up, read vendor managed inventory for metals.
Certifications, traceability and paperwork
Liverpool holds one of ASA’s ISO 9001:2015 certificates, alongside Auburn and South Portland. Mill certifications and full material traceability are available, and ASA can supply RoHS and DFARS documentation for customers whose contracts call for it. Products meet defense-grade standards. Details are on ASA’s quality page.
Ordering metal from ASA Liverpool
A clear request gets an accurate price the first time. Include the material and grade with its specification, the temper or finish, thickness or gauge, width and length, quantity, any cutting you need, the certifications you require and your delivery address and timing. Send it through the request a quote form or call 1-800-933-7833, and see how to order metal for a fuller checklist.
Frequently asked questions
What does the ASA Liverpool service center stock?
Liverpool customers order from ASA's stock list: hot rolled and cold rolled carbon steel including A36 and HSLA, stainless 304, 304L, 316, 316L and 430, aluminum 3003-H14, 5005 and 5052, galvanized, galvannealed, Galvalume and aluminized sheet, tread and diamond plate, structural angle, channel and wide flange beam, and carbon, stainless and aluminum bar and tube.
Which parts of New York does the Liverpool service center deliver to?
ASA Liverpool serves customers across New York State, from Albany to Buffalo, using ASA's company-owned truck fleet. Just-in-time delivery programs get most orders to customers in 24 to 48 hours. For repeat material, a scheduled delivery or vendor managed inventory program can keep stock arriving on a regular cycle without a new purchase order each time.
How do I get a price on steel, stainless or aluminum from ASA Liverpool?
Submit the request a quote form or call 1-800-933-7833. List each item with grade and specification, thickness, width, length and quantity, and note any cut-to-size work, certification needs and delivery timing. If you buy the same material regularly, mention expected annual volume, since that can open up inventory and release options.
Can the Liverpool service center cut material to size before delivery?
Yes. The Liverpool facility runs CNC plasma and oxy-fuel plate cutting along with flat and tube lasers, so plate, sheet and tube can ship as blanks, strips or cut profiles instead of full mill sizes. Cut-to-size material reduces handling and scrap in your shop and can be kitted by job or build sequence.